Shake, Rattle and Hold (Available in Structural Engineering Special Issue Only)
In-situ lateral load tests of two bridge bents were conducted on Interstate 15 in Salt Lake City, Utah, to determine the strength and ductility of an existing concrete bridge and the improvements...
Evaluation Findings for Tekton, Inc. Steel Rubber Bearings
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailed evaluation...
Evaluation Findings for Scougal Rubber Corporation High Damping Rubber Bearings
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailed evaluation...
Evaluation Findings for Tekton Inc. Roller Bearings
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailed evaluation...
Evaluation Findings for FIP-Energy Absorption Systems, L.C.C. Slider Bearings
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailed evaluation...
Evaluation Findings for Skellerup Base Isolation Elastomeric Bearings
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailed evaluation...
Evaluation Findings for Earthquake Protection Systems, Inc. Friction Pendulum Bearings
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailed evaluation...
On Solid Ground (Available only in the Geoenvironmental Special Issue)
On four transportation projects in Portland, Ore., soil nails and micropiles are used as alternatives to conventional earth-retention and foundation systems. The use of soil nails and...
Seismic and Dynamic Analysis and Design Considerations for High Level Nuclear Waste Repositories
This committee report was created to fulfill two primary objectives: 1) to provide guidance for assessing and defining the dynamic loads that must be considered in the design of a repository...
Dampers Hold Sway
In the wake of earthquakes like Kobe and Northridge, structural engineers in seismic design have begun to consider a new tool - seismic dampers. There are many different kinds, though,...
A Dual Answer to Seismic Stress (Available only in the Structural Engineering Special Issue)
Are two systems better than one? When it comes to high-rise seismic design post-Northridge, the answer may be yes, based on studies conducted by CBM Engineers, Inc., Houston. The aftermath...
Building Tension in Buffalo
The National Hockey League's Buffalo Sabres have a new home, topped with an unusual tension-braced domed roof. An ingenious combination of dome designs, the Marine Midland...
A Turnaround for Hangar Design
As the military's airplanes get larger and budgets get tighter, building hangars becomes more of a challenge. But by giving conventional rectangular hangar shapes a 90 degree...
Building to Last
This proceedings,
Putting the Wraps on Quakes
With bridges deteriorating all over the country at an alarming rate, state DOTs are searching for cost-effective retrofit solutions that will protect our aging bridge inventory from seismic...
Tracking Seismic Hazards
Union Station in downtown Portland, Ore. is a historic landmark but also a seismic risk. Engineers were charged with making a priority list of hazards so that the owners could prioritize...
Design of Hydraulic Steel Structures
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 22 This manual prescribes guidance for designing hydraulic...
Guidelines for Seismic Evaluation and Design of Petrochemical Facilities
These guidelines are intended to provide practical recommendations on several areas which affect the safety of a petrochemical facility during and following an earthquake. In the area...
Spatial Analysis in Soil Dynamics and Earthquake Engineering
This Geotechincal Special Publication contains the papers presented by the invited speakers in the sessions on Spatial Analysis in Soil Dynamics and Earthquake Engineering held during...
Wind Loads and Anchor Bolt Design for Petrochemical Facilities
Current codes and standards do not address many of the structures found in the petrochemical industry. Therefore, many engineers and companies involved in the industry have independently...
Return to search